I just finished working on my Accumonitor page. I wanted to show off some new features.
First, as seen in the picture on top, and in the bottom left hand corner of the page, we have 4 different canisters to offer with your Accumonitor. The round canisters are 1 pint, 1 quart, and 1/2 gallon. You can fill them about 2/3rds of the way with distilled water. Matt from Avallo makes spanish cedar boxes that hold the bottles. You can screw the canister box onto a shelf or wall of your cabinet. These boxes hold the canisters in place to prevent a canister from tipping over. Some customers want the boxes, some dont. Its a no cost option.
We also offer the larger "box" type poly canister. This canister will hold about a quart of water. The air intake, and the air exhaust are on the top of the canister. This design works well because you can put a box of cigars right against the canister, and it wont block the air intake.
We also will have another box type canister that will not be very tall. This will fit nice in the singles drawer of cabinets. Most other canisters are too tall for a shallow drawer. There will be no wick in this model. We will be using polymers so that there is no chance of water spilling out onto your singles.
We have a lower priced Accumonitor. Its really the same Accumonitor, just configured a little bit different. We wanted this one to be a simple, easy self install humidifier. At $219.99, it comes close in price to the "Made in China" imitators, but offers much more performance and features than the competition.
Here is the link, and thanks for reading and looking, Ron.
http://stores.cigarsolutions.com/Categorie...lo+Accumonitors
First, as seen in the picture on top, and in the bottom left hand corner of the page, we have 4 different canisters to offer with your Accumonitor. The round canisters are 1 pint, 1 quart, and 1/2 gallon. You can fill them about 2/3rds of the way with distilled water. Matt from Avallo makes spanish cedar boxes that hold the bottles. You can screw the canister box onto a shelf or wall of your cabinet. These boxes hold the canisters in place to prevent a canister from tipping over. Some customers want the boxes, some dont. Its a no cost option.
We also offer the larger "box" type poly canister. This canister will hold about a quart of water. The air intake, and the air exhaust are on the top of the canister. This design works well because you can put a box of cigars right against the canister, and it wont block the air intake.
We also will have another box type canister that will not be very tall. This will fit nice in the singles drawer of cabinets. Most other canisters are too tall for a shallow drawer. There will be no wick in this model. We will be using polymers so that there is no chance of water spilling out onto your singles.
We have a lower priced Accumonitor. Its really the same Accumonitor, just configured a little bit different. We wanted this one to be a simple, easy self install humidifier. At $219.99, it comes close in price to the "Made in China" imitators, but offers much more performance and features than the competition.
Here is the link, and thanks for reading and looking, Ron.
http://stores.cigarsolutions.com/Categorie...lo+Accumonitors